Ok, first of all, why are you taking the CV joint clamp off? You don%26#039;t have to touch it to remove a bearing.
Normal way to remove a wheel bearing on the front of a GM car:
Remove tire
Remove caliper and bracket
Hang caliper and bracket from something other than the brake hose
Remove the rotor
Remove the axle nut
Disconnect ABS connector
Remove 3 bolts holding wheel bearing to spindle
Remove bearing assy
Install new bearing assy
Install 3 bolts and tighten evenly
Install axle nut and torque to spec (usually 160 ft/lbs)
Connect ABS connector
Install rotor
Install brake caliper and bracket
Install wheel and torque bolts to 100 ft/lbs
Test drive|||Use some diagonals and cut it.|||you have to cut it,go to the parts store and get a new zip-lock clamp,its real simple to use,good luck
